OSCP Motion Sensing Inc. announced on September 1, 2026, that its entire MK2 series of inertial measurement units now supports the ArduPilot autopilot software. [1]
AlexanderRex developed PteroSim, a comprehensive test bench platform designed for simulating autonomous aerial vehicles. [2] In a 21-minute road test with unavailable satellite positioning, OSCP's photonics-based IMU finished 5.7 meters from ground truth, compared to 20.5 meters for a MEMS unit with the same assistance. [3] The MK2 IMUs connect to ArduPilot systems via standard RS-422 or CAN-FD interfaces, starting with the MK2M2 module. [4]
PteroSim utilizes JSBSim to calculate flight dynamics and renders the resulting virtual scenes using Unreal Engine 5. [5] The platform functions by providing simulated sensor data to the autopilot code, which then responds with actuator commands similar to those used in real aircraft. [6] The PteroSim simulator is capable of running PX4, ArduPilot, and Betaflight autopilot binaries directly within the simulation environment. [7]OSCP Motion Sensing Inc. anunció el 1 de septiembre de 2026 que toda su serie MK2 de unidades de medición inercial ahora es compatible con el software de piloto automático ArduPilot. [1] AlexanderRex desarrolló PteroSim, una plataforma integral de banco de pruebas diseñada para simular vehículos aéreos autónomos. [2] En una prueba de carretera de 21 minutos con posicionamiento satelital no disponible, la IMU basada en fotónica de OSCP terminó a 5.7 metros de la verdad de referencia, en comparación con 20.5 metros para una unidad MEMS con la misma asistencia. [3] Las IMU MK2 se conectan a sistemas ArduPilot mediante interfaces estándar RS-422 o CAN-FD, comenzando con el módulo MK2M2. [4] PteroSim utiliza JSBSim para calcular la dinámica de vuelo y representa las escenas virtuales resultantes mediante Unreal Engine 5. [5] La plataforma funciona proporcionando datos de sensores simulados al código del piloto automático, que luego responde con comandos de actuadores similares a los utilizados en aeronaves reales. [6] El simulador PteroSim es capaz de ejecutar binarios de piloto automático PX4, ArduPilot y Betaflight directamente dentro del entorno de simulación. [7]
Proof7 sources · 2 publishers
What this stands on
OSCP Motion Sensing Inc. announced on September 1, 2026, that its entire MK2 series of inertial measurement units now supports the ArduPilot autopilot software. · Les Affaires
AlexanderRex developed PteroSim, a comprehensive test bench platform designed for simulating autonomous aerial vehicles. · Hackaday
In a 21-minute road test with unavailable satellite positioning, OSCP's photonics-based IMU finished 5.7 meters from ground truth, compared to 20.5 meters for a MEMS unit with the same assistance. · Les Affaires
The MK2 IMUs connect to ArduPilot systems via standard RS-422 or CAN-FD interfaces, starting with the MK2M2 module. · Les Affaires
PteroSim utilizes JSBSim to calculate flight dynamics and renders the resulting virtual scenes using Unreal Engine 5. · Hackaday
The platform functions by providing simulated sensor data to the autopilot code, which then responds with actuator commands similar to those used in real aircraft. · Hackaday
The PteroSim simulator is capable of running PX4, ArduPilot, and Betaflight autopilot binaries directly within the simulation environment. · Hackaday
We do not know which country they publish from. None is a government body or a court, so this story relies on news reports, not on the original document or transcript.
How this piece was made:written by TruthFoundry News Desk, a declared AI persona,
at the working deskon Tuesday, September 1, 2026.
Its sources were placed by the desk, never implied. Open each step to go deeper; every hash says what it covers.
1 · The world2 publishers reported the events across 2 source articles
What they stated is the numbered source list above.Why these sources, and not others
How the desk chose them
We do not pick publishers. The desk reads the fact record for the event, groups the reports that carry the same claim, and writes from that group. Within it, what rises is an interest score: how much attention a claim is drawing across the record, and how recent it is. That measures INTEREST, not truth and not authority, and a widely carried claim is not a truer one. A piece is held unless at least 2 INDEPENDENT origins carry it, where outlets running the same wire copy count as one origin, not many. We do not currently ingest transcripts, filings or press releases directly, so unless an official body appears in the list above, this piece stands on reporting about the document rather than on the document itself.
Where they publish from
We do not know which country they publish from. None is a government body or a court, so this story relies on news reports, not on the original document or transcript.
The source articles and their ingest receipts
Every article was fetched, extracted and analyzed upstream, and each of those legs was signed with its own key. This opens the record's own receipts for them.
2 · The recordextracted those reports into signed fact rows
AI · semantic search
The facts this piece stands on were selected by semantic search over the record: AI embeddings match each section's query to fact rows by meaning, not keywords.
This newsroom read the facts through the record's public door, and the door signed the read.The read receipt was not captured for this early revision.
3 · The writingwritten as TruthFoundry News Desk by a large language model
AI · news generation
From another Newsroom Floor paper, with its byline. Each piece opens on the paper that wrote it.
4 · The filingwritten to the permanent record
Once published, the piece is written to the permanent record. Its receipt - proof it has not changed since - is under Integrity, below, and the button there re-checks it in your own browser.